Austin Straubel International Airport
Green Bay, Wisconsin
Version 3.1 For Microsoft Flight Simulator 6.0 For Windows 95
By Michael Pickney

     This is my third version of my favorite destination airport, the gateway to Packerland. This all new, greatly improved version of Austin Straubel Field was built using the actual geographic coordinates of the airport's facilities and runways. It was compiled using Airport Version 2.02. It is accurate in the placement of every runway, taxiway, building, and tree!. At night the runways and taxiways are well lit for ease of navigation. Takeoff from runway 06 and the City of Green Bay will be just in front of you. See if you can spot Lambeau Field. It's right where it is supposed to be. I hope that you enjoy this new version as much as I do. Enjoy your flight to the land of the Cheeseheads! 

Installation:

    Note: If you have installed Green Bay Version 2.0 you need to remove it before installing this new scenery area. Remove all .stn files that start with Green Bay from your FS6 Pilots folder. Next remove all .bgl files that start with GRB from your FS6 Texture folder. You are now ready to install Green Bay Version 3.1.   

     This scenery requires the Airport 2.02 Texture Files! If you don't have them, download them and unzip them into your FS6 Texture folder.

Then...

1.  You will have already unzipped grb_31.zip into a temporary directory.
2.  Copy the Green Bay folder to your Flight Simulator Scenery folder. 

Then...

In Flight Simulator 6.0:

1.  From the World pull down menu click on Scenery Library.
2.  You will see a screen that say's "If you are not sure how to use blah, blah, blah". Click OK.
3.  On the Scenery Library screen click the Files... button.
4.  On the Scenery Areas screen click the Add... button.
5.  On the Add Scenery Area screen you will enter the Scenery Area Path for the new scenery area. Type it exactly as it is shown where "C" is the drive that you have Flight Simulator installed:

C:\Program Files\Microsoft Games\Flight Simulator\Scenery\Green Bay\SCENERY\*.BGL

6.  Enter the Scenery Area Title: Green Bay, WI.
7.  Set the Scenery Area Type to Local.
8.  Click the Scenery Area Active button.
9.  Set the Scenery Area Layer to 0001.
10.  Click on the OK buttons until you are back to your main Flight Simulator screen.
11.  You are now ready to go flying in Packerland!  
	

How To Get To The Airport:

     Use the World pull down menu, then select the Go To Airport menu to find the airport. It will be listed as Green Bay, WI.

Additional Notes:

     If you are planning to use BAO Flight Shop to create adventures for flying out of Green Bay's Austin Straubel Field I would recommend that you make the following change to its Airports Database:

Lat: N-44-29-28.9450
Lon: W-088-07-43.3670
Elev: 479' ASL

These changes will position you at the main terminal building when you begin your adventure. It will more realistically simulate the beginning of a real flight. The NAV 1 radio is set to the Green Bay VOR. The NAV 2 radio is set to the Oshkosh VOR. These radios are set in this manner merely for convenience and you may reset them as you please.    

Runways:

06/24 		Length 7,699'		Width 150'		ILS available on runway 06
12/30		Length 3,198'		Width 75'
18/36		Length 8,200'		Width 150'		ILS available on runway 36

Airport's Elevation in Flight Simulator 6.0 is 479' ASL

Airport's Magnetic Variance is W-02

Navigational Aids:

Runway 06 ILS Frequency is 109.50
Runway 36 ILS Frequency is 109.90

Austin Straubel's ATIS Frequency is 124.10
Green Bay's VOR is located 5 miles north of the airport. The frequency is 115.50 

Austin Straubel's airport identifier is GRB.

     This airport add-on was designed for use with Microsoft Flight Simulator Version 6.0 for Windows 95 only. It will not work with previous or later versions of Microsoft Flight Simulator because of differences in geographic coordinates and elevations.

Legal Stuff:

     The designer accepts no responsibility or liability for any damages incurred due to the use of these files. These files are freeware. They are meant to be distributed freely. They may only be made available for download at other sites if they are to be distributed for free and in current form. They may not be used by anyone for monetary gain! These files may never be modified and must always be accompanied by this document. If you have any questions or comments you may E-mail me at mpickney@pacbell.net . 

Acknowledgements:

Thanks to Lenice and Richard Brunson (my aunt and uncle) of Suamico, WI for their help in gathering reference materials for this project.

Special thanks to Julie at Austin Strabel's Executive Offices for the fantastic schematic diagrams of the airport and it's facilities.

1997 MICHAELSOFT INC.  

